Skip to Content

CERESIT CT 137 MINERAL DRY

  • Highly vapour permeable (breathable) and non-inflammable
  • Durable and resistant to weather conditions
  • Naturally resistant to fungi, algae and mould

Features and benefits

Decorative thin layer plaster for indoor and outdoor applications. Stone like structure, grain 1.5 mm, 2.0 mm or 2.5 mm.

Properties

Description

CERESIT® CT 137 is used for making thin layer plasters on concrete substrates, traditional plasters, gypsum substrates and gypsum cardboards, gypsum fibre boards. We recommend the application of the plaster CT 137 as façade plaster within CERESIT Ceretherm ETICS with the use of EPS or mineral wool boards. We also recommend performing ceilings’ warming within CERESIT Ceretherm Wool Garage System, with the application of mineral lame wool boards. Available pack size: 25 kg

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 137 SUBSTRATE PREPARATION

CERESIT CT 137 can be applied to carrying substrates that are smooth, dry and clean (free from any substances decreasing adhesion such as grease, bitumen, dust). Absorbent substrates should be primed with the agent CERESIT CT 17, and then painted with CT 16 after minimum 2 hours.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 137

The whole content of the packaging should be poured into the measured amount of clean, cool water and mixed by means of the drill with a mixer until the homogeneous mass without lumps is obtained. Plaster should be evenly applied to the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure with round movements. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 137

CERESIT CT 137 includes cement, Additionally, when mixed with water, it shows alkaline reaction. Therefore, skin and eyes should be protected. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-35/SAP_0201IEC014H8/searchResult.productFields.MainImageAltText}
    CERESIT CT 35
    Decorative thin layer plaster for indoor and outdoor applications. Mineral plaster, woodworm lilke structure, grain 2.5 mm or 3.5 mm.
     
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-34/SAP_0201IEC014H6/searchResult.productFields.MainImageAltText}
    CERESIT CT 34
    White, mineral smooth plaster for thermal insulation systems and for use as a mineral putty for making smooth surfaces and repairing traditional plasters, inside and outside buildings. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17-transparent/SAP_0201JAC016G7/searchResult.productFields.MainImageAltText}
    CERESIT CT 17 TRANSPARENT
    Deep penetrating, quick-drying primer for surface reinforcement of all absorbent substrates, suitable for indoor and outdoor areas. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-54/SAP_0201IFC014J9/searchResult.productFields.MainImageAltText}
    CERESIT CT 54
    Hydrophobic, vapour permeable paint for buildings’ façades and interiors. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-80/SAP_0201IAC014M1/searchResult.productFields.MainImageAltText}
    CERESIT CT 80
    For fixing Expanded Polystyrene boards, XPS and mineral wool boards as well as for applying a thin-reinforced layer for thermal insulation of buildings by means of ETICS. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 

Frequently asked questions