Skip to Content

CERESIT CT 240 WINTER

  • Enables conducting works in low temperature and high air humidity
  • Easy to use
  • Neutral for other materials properties

Features and benefits

For binding and drying of plaster and paint coatings in the conditions of low temperatures.

Properties

Description

CERESIT® CT 240 is an additive to thin-coat acrylic plasters, silicone-silicate plasters, silicone plasters and priming paints and acrylic paints, silicone paints. It accelerates binding and drying of CERESIT plasters and paints in conditions of low temperature and high air humidity. The additive enables conducting works in the late autumn and early spring periods, when the temperature at night drops below zero. Available pack size: plastic container 100 ml

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

APPLICATION OF CERESIT CT 240

CERESIT CT 240 WINTER should be added to the plaster or paint during mixing of products right before application. After a thorough mixing (about 1 min.), the material is ready for application. The applied material is resistant to temperatures below zero after 6 – 8 hours from application. CERESIT dispersion products, after the addition of CT 240 WINTER, can be applied with the air and ground temperatures from 0 °C to +15 °C and air humidity up to 90 %.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

IMPORTANT TO NOTE WHEN USING CERESIT CT 240

Use of the additive does not cause decrease of the resistance parameters of the product, nor has it any influence on the final colour of the plaster coating or paint. The product should not be mixed with other plasters, dyes, resins or other adhesives. In case of a contact of the material with eyes, they should be washed with water and a doctor should be consulted. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-280/SAP_0201IKC014G8/searchResult.productFields.MainImageAltText}
    CERESIT CT 280
    For binding and drying of adhesive mortars in the conditions of low temperatures. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-80/SAP_0201IAC014M1/searchResult.productFields.MainImageAltText}
    CERESIT CT 80
    For fixing Expanded Polystyrene boards, XPS and mineral wool boards as well as for applying a thin-reinforced layer for thermal insulation of buildings by means of ETICS. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
    CERESIT THERMO UNIVERSAL
    Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-60/SAP_0201IDC014K0/searchResult.productFields.MainImageAltText}
    CERESIT CT 60
    Decoractive thin layer plaster with stone structure and grain size of 1.5 mm, 2.0 mm or 2.5 mm for indoor and outdoor applications. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-174/SAP_0201IDC014F2/searchResult.productFields.MainImageAltText}
    CERESIT CT 174
    Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}
    CERESIT CT 74
    Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-76/SAP_0201IDC014L6/searchResult.productFields.MainImageAltText}
    CERESIT CT 76
    Decorative thin-layer plaster with increased UV protection for indoor and outdoor applications. Stone like structure with grane size of 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-48/SAP_0201IFC014J6/searchResult.productFields.MainImageAltText}
    CERESIT CT 48
    Hydrophobic, vapour permeable paint for buildings’ facades and interiors. 

Frequently asked questions