CERESIT® P 625 is designed to prevent hardwood floor from expanding and contracting in response to climatic changes over year. The water- and solvent-free, 2-component polyurethane adhesive does not allow any movement of the wood flooring – even when installing hardwood of unusually large dimensions.Available bucket size: 16 kg
The substrates must be clean, free from structural defects, firm, dry and free of substances which may impair adhesion.
Stir the adhesive well and apply it evenly to the substrate with a suitable notched trowel. Only apply as much adhesive as can be laid with wood flooring within the working time. Ensure the backing of the wood flooring is well wetted. Avoid gluing the edges.
Allow a minimum gap of 10 mm from walls. Remove the spacer wedges from the perimeter joints immediately- after installation. Avoid walking on the parquet surface both during and for at least 24 hours after installation.
CERESIT P 675 can be used on: wood flooring, mineral screeds, dry screed constructions, chipboards (V100) and OSB boards, natural stones, tiles and terrazzo.
Use CERESIT P 675 for bonding solid wood flooring of larger formats, exotic woods and wood block.
Carry out floor installation work at floor temperatures above 15 °C, air temperature above 18 °C and the relative humidity below 75 %.