CERESIT® IN 46 is used to achieve white and smooth wall and ceiling surfaces to be finished with paint coats and wallpapers. After setting completely, it creates a durable, solid and stable substrate. Thanks to the use of the special SMART POLYMER Technology, a perfectly smooth and resistant surface can be achieved. The material is ready for use, it is easily applied and processed.Available pack size: 3 kg, 15 kg and 25 kg.
CERESIT IN 46 can be applied on load-bearing substrates that are dry and free from grease, bitumen, dust, loose plaster grains and other substances decreasing adhesion. Any stains and layers of poor strength shall be completely removed. This also applies to any anti-adhesion substances and paint coats.
White render & finish skim coat CERESIT IN 46 is ready for use. After opening, the content of the package shall be thoroughly mixed with a mixing paddle. If necessary, increase the quantity of water by approx. 2 % for a package and mix again. For mechanical application, the water addition will be approximately 4 %.
The material shall be applied on the surface with a metal float oat. After application, the material shall be smoothed using a wide metal float oat made of stainless steel and left to dry. After the hardening of the material, the surface is ready for smoothing with sandpaper or a grinding mesh and a so-called giraffe grinder. See more details for the application of the product in the Technical Data Sheet.
The material has excellent adhesion to gypsum substrates, plasterboards, aerated concrete, cement and cement-lime plasters. It can also be applied on concrete substrates. The material must not be used on wood-derivatives, metal, glass or plastic substrates.
CERESIT IN 46 is could be used in wet areas with moderate humidity level (private bathrooms, kitchens, showers) etc.
Apply at temperature from +5 °C to +35 °C. Protect from frost! Protect from direct sunlight.