- For all absorbent substrates
- Reinforces the surface of the substrate
- Reduces absorbability of the substrate
-
For all absorbent substrates
-
Reinforces the surface of the substrate
-
Reduces absorbability of the substrate
-
Increases adhesion to the substrate
-
Colourless after drying
-
Breathable and vapour permeable
CERESIT® CT 17 TRANSPARENT is a solvent-free universal primer for substrates (walls, floors, ceilings) indoor and outdoor prior to fixing ceramic tiles, pouring floors, fixing floor lining, papering, puttying, painting, or fixing thermal insulation boards. Substrates primed with CT 17 TRANSPARENT (all kinds of absorbent substrates) are of lower absorbency, which prevents too rapid over drying of adhesive mortars, flooring, putties and paints. Available canister size: 5 l and 10 l.
CERESIT CT 17 TRANSPARENT adheres to all solid, load-bearing, clean, dry and damp surfaces that are free of separating substances. Unstable zones must be completely removed mechanically. The surface must have a rough, porous and non-slip structure.
Use the primer in diluted form (1:1 with water) or undiluted depending on the type and absorbency of the substrate. In the case of priming substrates for floors, pour CERESIT CT 17 TRANSPARENT on the substrate and distribute it evenly, without forming puddles.
Apply the product to the substrate with a brush or roller. CERESIT CT 17 TRANSPARENT dries in approx. 2 hours. In the case of gluing ceramic tiles on cement and cement-lime substrates, work can be started as early as 15 minutes after priming.
CERESIT CT 17 TRANSPARENT can be used on all kinds of absorbent substrates.
CERESIT CT 17 TRANSPARENT can be used outdoors and indoors before fixing ceramic tiles, pouring floors, fixing floor coverings, wallpapering, puttying, painting or fixing thermal insulation boards.
Use CERESIT CT 17 TRANSPARENT only in dry conditions and at temperatures of +5 °C to +30 °C.