Concrete repair
CERESIT CD 30
1-component, anti-corrosion protection and contact mortar „2 in 1”
1-component, anti-corrosion protection and contact mortar „2 in 1”.
-
With corrosion inhibitors
-
Excellent adhesion to concrete and steel
-
For concrete class above C12/15
- Description
- How to Use
- FAQ
CERESIT® CD 30 is used for anticorrosion protection of reinforced bars as well as a contact layer on the concrete and reinforced concrete before the application of other system components. Application of CD 30 between concrete and repair mortar enables the achievement of very good parameters of mutual cooperation at the top layer. CD 30 is part of the concrete repair system Ceresit PCC, which additionally consists of CD 24, CD 25, CD 26.
-
With corrosion inhibitors
-
Excellent adhesion to concrete and steel
-
For concrete class above C12/15
-
Resistant to frost and de-icing road chemicals
-
For vertical and horizontal surfaces
Ceresit CD 30 is suitable for repairing the following areas: balconies, consoles, columns and load-bearing trusses, covers, etc.
Mortar CD 30 has a high adhesion to steel and concrete. Its use between the existing concrete and the layer to be repaired makes it possible to achieve very good parameters of mutual work at the boundary of the layers.
The work must be done in dry conditions, when the air and the base temperature is from +5 °C to +30 °C and relative air humidity less than 80%. Fresh mortar stains should be washed off with water, while hardened ones should be washed off must be removed mechanically.