Masonry mortars

CERESIT CT 32
Clinker mortar

Cement mortar for brick-laying and pointing clinker elements inside and outside

Decreases the possibility of salt efflorescence
Contains trass
Frost- and water-resistant

TDS (1)

CERESIT CT 32

en_GL | application/pdf

Find a retailer

We have you covered

Find a retailer

Works Well With

$${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-17/SAP_0201SBC013W2/searchResult.productFields.MainImageAltText}$

Flex adhesives (powder)

CERESIT CM 17

Premium, flexible tile adhesive with high adhesive strength for all kind of tiles on difficult substrates and for large tiles.

...
$${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}$

Universal primers

CERESIT CT 17

Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards.

...
$${/content/heliux/adhesive/ceresit/com/en/products/tiling/product#/ceresit-cm-49-white/SAP_0201SCC013X1/searchResult.productFields.MainImageAltText}$

Special adhesives

CERESIT CM 49 WHITE

Special mega flexible (S2) white tile adhesive for demanding substrates, ideal for large-format tiles, young screeds and natural stone.

...
$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cx-10/SAP_0201VFC014O1/searchResult.productFields.MainImageAltText}$

Building foams

CERESIT CX 10

Ready-to-use, quick-drying PU adhesive with good adhesion to the typical construction substrates.

...
$${/content/heliux/adhesive/ceresit/com/en/products/waterproofing/product#/ceresit-cr-166/SAP_0201WJC014B9/searchResult.productFields.MainImageAltText}$

Cement slurries flexible

CERESIT CR 166

2-component flexible slurry, strengthened with fibres and designed for waterproofing and damp-proofing on deformable and non-deformable mineral substrates.

...

Description
How to Use
FAQ

Product Description

CERESIT® CT 32 can be used for brick-laying and pointing load-bearing, foundation and facade walls, chimneys, fences, elements of small architecture made of clinker bricks. Additive of trass improves the workability and reduces the salt efflorescence. The mortar can also be used for pointing clinker tiles up to 30 mm thickness.

Decreases the possibility of salt efflorescence
Contains trass
Frost- and water-resistant
Vapour permeable
Amount required: approx. 2.0 kg / dm2

packshot-front-pl-ceresit-CT32-1280x1280

How to Use

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT CT 32

CT 32 adheres to all solid, load-bearing, clean, dry and moist substrates free of substances which may impair adhesion. The surface must have a rough, open-pored structure. Pre-wet concrete, cement screed, cement plaster and brickwork so that they are no longer absorbent.

APPLICATION OF CERESIT CT 32

Sprinkle CT 32 into clean, clear water and stir until completely free of lumps. Observe the following mixing ratio: 1 part by volume of water to approx. 4 parts by volume of mortar or approx. 0.75 to 0.9 l of water for 5 kg of CT 32. Apply CT 32 within about 20 minutes and, if required, texture the surface. Protect the mortar against too rapid drying.

IMPORTANT TO NOTE WHEN USING CERESIT CT 32

Before starting work, it is necessary to check whether clinker bricks are dry. Their moisture content must not exceed 6%. Jobs must be done at a temperature of +5 °C to +25 °C. These conditions must be maintained for both the work being done and the mixture during coupling.

Frequently asked questions

CERESIT CT 32 is suitable for For brick-laying and pointing load-bearing, foundation and facade walls, chimneys, fences, elements of small architecture made of clinker bricks.

Looking to Upgrade?

$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cx-10/SAP_0201VFC014O1/searchResult.productFields.MainImageAltText}$

Building foams

CERESIT CX 10

Ready-to-use, quick-drying PU adhesive with good adhesion to the typical construction substrates.

...
$${/content/heliux/adhesive/ceresit/com/en/products/waterproofing/product#/ceresit-cr-166/SAP_0201WJC014B9/searchResult.productFields.MainImageAltText}$

Cement slurries flexible

CERESIT CR 166

2-component flexible slurry, strengthened with fibres and designed for waterproofing and damp-proofing on deformable and non-deformable mineral substrates.

...

Related How-To Guides

View all

Chemical anchor in hollow masonry

Fix metal anchor in hollow masonry substrate.
Chemical anchor in concrete

Fixing metal anchor in in concrete.

CERESIT CT 32 Clinker mortar

Documents