Special & dispersion grouts
CERESIT CE 60
READY-TO-USE GROUT 1-6MM
One-component ready-to-use polymer grout for joints up to 6 mm wide.
-
Ready-to-use & reusable
-
Easy application and cleaning
-
Washing and profiling immediately after application, within max 10 minutes
- Description
- How to Use
- FAQ
CERESIT® CE 60 is a high quality ready-to-use grout for joints up to 6 mm in width. Due to its one-component-formula based on polymer, its application is exceedingly easy. When applying the grout, it's important to wash and profile the joints immediately after application. A maximum of 2 m2 of area should be grouted at a time, which should then be washed immediately, but no later than 10 minutes after application. 100% stable colors and long-lasting perfect joints. CE 60 is suitable for all indoor applications and a great choice for almost any material. It works perfectly with a wide variety of tiles - from mosaics to large formats. Available pack size: 2 kg
-
Ready-to-use & reusable
-
Easy application and cleaning
-
Washing and profiling immediately after application, within max 10 minutes
-
100% colour stability
-
Ultra-high stain resistance
-
Suitable for all indoor applications and types of tiles
Thoroughly clean the tile edges of any dirt. Remove any plastic spacers. The spaces must be empty through the entire depth of the tiles. Remove any residues of adhesive mortar from between the tiles. Grouting can begin after the tile adhesive has hardened and set. Check beforehand whether the tiles and natural stone are resistant to discolouration.
Open the CERESIT CE 60 package and briefly mix the grout, manually or mechanically, to obtain uniformed consistency. Once mixed, the grout is ready to use. Do not add water.
Apply a small amount of grout to the joint using a rubber trowel. Carefully work the mixed compound into the spaces between the tiles. A maximum of 2 m2 of grout should be grouted at a time. Remove any excess grout immediately. Clean the surface with warm water within 10 minutes of application. First carefully rinse the entire surface with a damp sponge or a spray bottle, then remove the remaining grout from the surface of the tiles. Use as little water as possible to avoid damaging the surface. Avoid any strong pressure of the grout. Apply the grout to a small area (max. 2 m2), profile, clean and move on to the next surface, repeating the same process.
CERESIT CE 60 is suitable for grouting all types of ceramic cladding, such as glazed ceramic tiles, terracotta, gres, sintered quartz tiles, clinker tiles, porcelain stoneware, glass and ceramic mosaic, (colour-fast) natural stone cladding, for thin laminated stoneware slabs.
For the grouting of tiles of any size — from mosaic to extremely large formats, indoors, vertical and horizontal surfaces, for deformable and critical substrates, substrates exposed to vibration, underfloor and wall heating systems, surfaces where flexibility is required, e.g., chipboard, gypsum board, for wet areas such as bathrooms, kitchens etc.
Works should be carried out at ambient and substrate temperatures between +10°C and +30°C. Do not use if the room temperature is expected to drop below +10°C in the 24 hours following application.
Our Eco Buckets are made of polypropylene and can be recycled.
We incorporate post-consumer recycled plastic (PCR) into our Eco Buckets, reducing carbon emissions.
Ceresit's commitment to sustainability extends beyond Tiling products. Now, our Facade Solutions also benefit from Eco Bucket with packaging made from up to 62% recycled plastic.