CERESIT CT 72

Features and Benefits

Silicate plaster, stone like structure, grain size 1.5 mm or 2.5 mm

Decorative thin layer plaster for indoor and outdoor applications

Properties

  • High vapour permeable (breathing) and durable – resistant to damage and cleaning
  • Resistant to weather conditions
  • BioProtect formula – resistant to the development of fungus, algae and mould
  • Possibility of the machine application*
  • Colours of Nature®

Read More

Ceresit CT 72 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. We recommend the application of the plaster CT 72 as façade plaster within Ceresit ETICS (External Thermal Insulation Composite Systems) with the application of EPS-boards (Expanded Polystyrene boards) and mineral wool.

CT 72 plaster is recommended to be applied on the partitions where high permeability is required.

CT 72 is available in a wide range of colours, but in case of intensive dark colours, the material application on the façades should be limited to small areas, e.g. architectural details.

Plaster CT 72 is protected form biological paralyses, e.g. fungus, mould and algae.

Documents and Downloads

Technical Data Sheet
CERESIT CT 72
Download TDS

Step by step

The whole content of the container should be carefully stirred. If the need appears, it is possible to adjust the product consistency to the application conditions by adding a small amount of clean water and mixing again. Neither rusty containers nor tools can be used. CT 72 should be evenly applied on the substrate at the thickness of the grain by means of a steel long fl oat held at the angle. Then, it should be given homogenous structure with round movements by means of a plastic long fl oat fl atly held to achieve the appearance densely laid out aggregate grains structure.

 

Do not sprinkle plaster with water! 

Work should be done on one surface without breaks, keeping the same product consistency. If there is a need to stop working, the self-adhesive tape should be applied along the previously fixed line. Then plaster should be applied, structure formed, and tape torn off with the plaster remaining on it. After a break, the application should be continued from the fi xed place (the edge of the previously applied plaster can be protected with self-adhesive tape).

Related products/ systems