Features and Benefits

Fine, high quality grout mortar for non-absorbent tiles and joints of 1-8 mm width


  • Perfectly smooth
  • Long working time
  • Easy to apply
  • Frost resistant
  • For walls and floors
  • For indoor, outdoor & wet rooms
  • For non-absorbent tiles and mosaic

Read More

Fine grouting mortar, easy to apply, for filling joints in ceramic wall and floor coverings, glass and porcelain mosaics. The very high filling power and easy washability of CE 33 ensures rapid and efficient grouting work.

Step by step

Preparation & mixing

Adhesive mortar must have set and dried sufficiently and the joints must be free of adhesive residues and dirt.
Pour the required amount of CE 33 into a bucket with clean, clear water - use the correct mixing ratio with water as defined on the packaging. Mix with an electric driller until you achieve a homogenous mixture, free of lumps. Leave for 3 minutes to mature, then stir again.


Apply the mortar with a grouting tool on wall or floor in such a way that the joint is completely filled.


After the grout has started to set (fingertest), clean the area by wiping with a wet sponge and little water. The second cleaning should be done in diagonal movements with clean water.