Standard adhesives (powder)
CERESIT CM 11 PLUS
CERAMIC & GRES
Tile adhesive for indoor & outdoor (with limitations) applications of gres and ceramic tiles on wall and floor.
-
For earthenware and stoneware tiles
-
Stable adhesive mortar
-
Good processing properties
- Description
- How to Use
- FAQ
CERESIT® CM 11 PLUS adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (colour-fast), indoors and outdoors. Thanks to a special combination of fillers, the new mortar CM 11 PLUS is easy to apply, therefore making the progress of works faster.Available pack size: 25 kg.
-
For earthenware and stoneware tiles
-
Stable adhesive mortar
-
Good processing properties
-
Grouting on the wall after only 8h (gres tiles)
-
Extra NON-SLIP with larger tiles
CERESIT CM 11 PLUS can be applied on even, loadbearing and compact substrates, free of any substances that reduce adherence (grease, bitumen, dust).
Pour CERESIT CM 11 PLUS into the precisely measured amount of clean water (see technical data) and stir with a drill and mixer until a homogenous mass without lumps is reached. Leave for 2 min. and then stir again.
Apply the mortar with a suitable notched trowel. For indoor use, the mortar coverage (contact area) on the tile backside must be at least 65 %. The floating-buttering method shall be used for larger tiles and for outdoor applications.
CERESIT CM 11 PLUS adhesive mortar is designed for laying gres and other ceramic, cement and natural stone tiles (colour-fast), indoors and outdoors.
Grouting on the wall is possible after only 8h on gres tiles.
Work should be carried out in dry conditions at an air and surface temperature from +5 to +25°C.