CERESIT® CT 42 is used for protecting façades, concrete constructions, interiors. It can be applied on the mineral substrates (concrete, cement plasters, lime–cement plasters and lime plasters) and can be used for painting CERESIT. The facades covered with CT 42 can be washed with washing devices operating under low pressure. BioProtect formula is effective and durable protection of facade from biological paralyses. Available pack size: 15 l
CERESIT CT 42 may be applied on carrying, smooth, dry and clean substrates. Firstly uneven and damaged substrates should be repaired. The existing dirt, layers of low strength, lime and adhesive paint coatings as well as the residuals of wall paper or glues should be completely removed. After being washed with water, the substrate should dry.
Before the paint application, the content of the container should be carefully stirred by means of a drill with a mixer for about 2 minutes. Between the application of the subsequent layers the 4- to 6-hour technological breaks should be maintained. CERESIT CT 42 should be applied evenly by means of a brush, roller or a sprinkling device.
Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause decolouration impossible to be removed on glass, ceramic, wooden, metal and stone surfaces. Skin and eyes should be protected.
CERESIT CT 42 is used for protecting facades, concrete constructions, interiors. CT 42 can be used for painting CERESIT CT 34, CT 35 and CT 137 mineral plasters, CERESIT CT 60, CT 63, CT 64 acrylic plasters applied on traditional substrates and within CERESIT ETICS.
CERESIT CT 42 can be applied on the mineral substrates: concrete, cement plasters, lime–cement plasters and lime plasters.
CERESIT CT 42 is present in CERESIT Ceretherm POPULAR System