CERESIT CT 48 SILICONE SELF-CLEAN

  • Highly self-cleaning and dirt resistance
  • Low-water absorption and highly vapour permeable
  • Durable

Features and benefits

Hydrophobic, vapour permeable paint for buildings’ facades and interiors.

Properties

Description

CERESIT® CT 48 is used for protecting facades, concrete constructions, interiors. It can be used on the mineral substrates and for painting CERESIT. The structure of the coating ensures fast moisture evaporation from the substrate and creates an efficient protection against the substrate moisture and humidity. It is highly recommended to use CT 48 in historical objects, on the renovation and aerated plasters, on all the surfaces where aesthetic qualities and duration of the coating is required. Available pack size: 15 l

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 48 SUBSTRATE PREPARATION

The paint CERESIT CT 48 may be applied on carrying, smooth, dry and clean substrates. Firstly, uneven and damaged substrates should be repaired. The existing dirt, layers of low-strength, lime and adhesive paint coatings, as well as the remainders of wallpaper or glues should be completely removed. After being washed with water, the substrate should dry.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 48

Before the paint application, the content of the container should be carefully stirred by means of a drill with a mixer for about 2 minutes. Between the application of the subsequent layers at least 12- to 24-hour technological breaks should be maintained. CERESIT CT 48 should be applied evenly by means of a brush, roller or a sprinkling device. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 48

Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause discoloration impossible to be removed on glass, ceramic, wooden, metal and stone surfaces. Skin and eyes should be protected. Protective gloves and glasses should be worn while applying the paint. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/central-pdp#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-49/SAP_0201IFC014J7/searchResult.productFields.MainImageAltText}
    CERESIT CT 49
    Highly hydrophobic, vapour permeable paint for buildings’ facades and interiors. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}
    CERESIT CT 74
    Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-44/SAP_0201IFC014J2/searchResult.productFields.MainImageAltText}
    CERESIT CT 44
    For painting buildings’ facades and interiors. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-54/SAP_0201IFC014J9/searchResult.productFields.MainImageAltText}
    CERESIT CT 54
    Hydrophobic, vapour permeable paint for buildings’ façades and interiors. 

Frequently asked questions

CERESIT CT 48 is used for protecting facades, concrete constructions, interiors. CT 48 can be used for painting CERESIT CT 34, CT 35 and CT 137 mineral plasters, CERESIT CT 60, CT 63, CT 64 acrylic plasters, CERESIT CT 72, CT 73 silicate plasters, CERESIT CT 174, CT 175 silicate-silicone plasters as well as silicone plasters CERESIT CT 74, CT 75 and elastomeric plaster CERESIT CT 79 applied on traditional substrates and within CERESIT ETICS with the application of EPS-boards.

CERESIT CT 48 can be applied on the mineral substrates: concrete, cement plasters, lime–cement plasters and lime plasters.

CERESIT CT 48 is present in CERESIT Ceretherm SELF CLEAN System