CERESIT® CT 710 plaster is used for execution of decorative plasters on traditional plasters, concrete and gypsum surfaces, chipboards, drywall boards. CT 710 as facade plaster is one of the components within ETICS, CERESIT Ceretherm with application of expanded polystyrene boards and mineral wool. Available pack size: 20 kg.
CERESIT CT 710 may be used on smooth, carrying, dry surfaces, free of substances which decrease adhesion. Uneven and damaged surfaces should be first smoothed and repaired. The existing soiling, low-strength layers, paint coats of elastic, lime and adhesive paints, wallpaper and remains of adhesives need to be completely removed. CT 710 may be applied after complete drying of CT 16.
Mix the contents of the container with a slow-speed driller fitted with a basket stirrer to obtain uniform consistence. CERESIT CT 710 Granite should be applied manually, uniformly on the surface, until thickness is achieved which ensures complete coverage of the surface. Use a plastic float to smooth plaster and getting visible before its surface starts to dry out. The float should not be pressed too strongly to the surface. When set, CT 710 creates non-uniform natural stone structure.
Application should be performed in dry conditions, at air and surface temperature from +10 °C to +25 °C and with relative air humidity below 80 %. Do not apply plaster on highly insolated walls, and protect against too fast drying, against rainfall, direct sunlight and strong wind until it is completely hard. Do not mix the product with other resins, plasters, dyes and binding materials.
CERESIT CT 710 VISAGE plaster is used for execution of decorative plasters. As facade plaster, it is one of the components within ETICS, CERESIT Ceretherm with application of expanded polystyrene boards and mineral wool. CT 710 is specifically recommended for places exposed to intense wearing and subject to rapid soiling, e.g. building plinths, entrances to buildings, corridors, staircases.
CERESIT CT 710 VISAGE is applied on traditional plasters, concrete and gypsum surfaces, chipboards, drywall boards, etc.
CERESIT CT 710 VISAGE is present in CERESIT Ceretherm VISAGE System