CERESIT® CT 720 is used for executing thin-layer plasters in thermal insulation systems, on concrete surfaces, traditional plasters, gypsum surfaces and on drywall, gypsum-fi bre boards. CT 720 as facade plaster is one of the components within CERESIT Ceretherm ETICS with application of expanded polystyrene boards and mineral wool boards. CT 720 plaster is manufactured white, ready for painting with the „Wood” CT 721 colouring impregnate available in 6 colours. Available pack size: 25 kg
CERESIT CT 720 may be used on smooth, compact, dry and clean surfaces. Uneven and damaged surfaces should be first repaired. The existing soiling, low-strength layers and paint coats of lime and adhesive paints need to be removed. Absorbent surfaces should be first primed with CT 17 agent, and, after at least 2 hours, painted with CT 16 priming paint.
Put the contents of the package into clean, cool water and mix until uniform mass is obtained. Apply plaster uniformly on the surface. Then, apply the structure by pressing silicone matrix with wood or any other required pattern. Using silicone matrix only with anti-adhesive agent CT 72 After min. 3 days from application, plaster shall be covered with the sprayed colouring CT 721 impregnate.
Application should be performed in dry conditions, at air and surface temperature ranging from +5 °C to +25 °C and air humidity under 80 %. CERESIT CT 720 includes cement and has alcalic reaction when mixed with water. Therefore, protect skin and eyes against it. When material comes into contact with the eyes, rinse the eyes with plenty of water and seek medical advice.
CERESIT CT 720 is used for executing thin-layer plasters and is one of the components within CERESIT Ceretherm ETICS with application of expanded polystyrene boards and mineral wool boards.
CERESIT CT 720 is used in thermal insulation systems, on concrete surfaces, traditional plasters, gypsum surfaces and on drywall, gypsum-fibre boards, etc.
CERESIT CT 720 VISAGE is present in CERESIT Ceretherm VISAGE System