Paints (finishes)

CERESIT CR 50
RENOVATION SILICONE PAINT

Silicone renovation paint for outdoor and indoor usage

Self-cleaning
Highly durable and dirt resistant
Very low water absorption and high vapor permeability

TDS (1)

CERESIT CR 50

en_GL | application/pdf

Find a retailer

We have you covered

Find a retailer

Description
How to Use
FAQ

Product Description

CERESIT® CR 50 is formulated with selected binders together with special fillers and pigments. Absorption of water and dirt is strongly limited, nevertheless the coating is highly permeable to water vapor. CR 50 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering, biological corrosion and in cases where high durability, dirt-pickup resistance, elasticity and abrasion resistance of the surface is required. Available pack size: 15 l and 3,5 l

Self-cleaning
Highly durable and dirt resistant
Very low water absorption and high vapor permeability
Thixotropic
Highly resistant to UV and weather conditions
Bio Protect formula – highly resistant to fungi, algae, etc.

How to Use

CERESIT CR 50 SUBSTRATE PREPARATION

CERESIT CR 50 may be applied on carrying, smooth, dry and clean substrates. Firstly uneven and damaged substrates should be repaired. Plaster filler Ceresit CR 64 can be used for repairs. It is recommended to check the strength of the existing mineral layers. The existing dirt, layers of low strength, lime and adhesive paint coatings as well as the residuals of wall paper or glues should be completely removed. It is recommended to use washing devices with the use of CT 98 agent for removing impurities. After being washed with water, the substrate should dry.

APPLICATION OF CERESIT CR 50

Before the paint application, the content of the container should be carefully stirred by means of the drill with a mixer for about 2 minutes. Usually it is sufficient to paint twice. Between the application of the subsequent layers at least 12- to 24-hour technological breaks should be maintained. CR 50 should be applied by means of a brush, roller or a spray device. It is important to apply the paint evenly. Application with spray machine using pressure machines is feasible. If there is such a need, it is possible to add not more than 5% of water and stir carefully.

IMPORTANT TO NOTE WHEN USING CERESIT CR 50

Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause discoloration impossible to be removed, therefore all the elements in contact with CR 50 should be protected. Skin and eyes should be protected. Protective gloves and glasses should be worn while applying the paint.

Frequently asked questions

CERESIT CR 50 is dedicated to be used outdoor and indoor, especially recommended for protecting of coated areas against weathering (e.g. sour rain), biological corrosion and in cases where high durability and dirt-pickup resistance as well as elasticity and abrasion resistance of the surface is required.

CERESIT CR 50 can be applied on the mineral substrates (concrete, cement plasters, lime–cement and lime plasters, gypsum, etc.).

CERESIT CR 50 is present in CERESIT Renovation System

Works Well With

$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cr-64/SAP_0201VNC014C2/searchResult.productFields.MainImageAltText}$

Renovation plasters

CERESIT CR 64

Finishing layer of the renovation façade system

...
$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cr-60/SAP_0201VNC01Q62/searchResult.productFields.MainImageAltText}$

Renovation plasters

CERESIT CR 60

Coating for renovation of historical buildings

...
$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cr-61/SAP_0201VNC014C0/searchResult.productFields.MainImageAltText}$

Renovation plasters

CERESIT CR 61

For historical and other buildings subject to renovation

...
$${/content/heliux/adhesive/ceresit/com/en/products/mortars-and-auxiliaries/product#/ceresit-cr-62/SAP_0201VNC014C1/searchResult.productFields.MainImageAltText}$

Renovation plasters

CERESIT CR 62

Renovation plaster, specialized for historical buildings

...

Related How-To Guides

View all

How to apply different types of plasters?

Ensure plaster application and texturing are done corectly.
How to apply architectural concrete plaster?

Make your facade stand out with Visage.
How to fix EPS insulation boards with adhesive mortar?

Tips & Tricks for installing EPS insulation with mortar.
How to fix EPS insulation boards with PU adhesive?

Guidelines to fixing EPS boards with PU adhesive.
How to repair mechanical damages in plastered insulation?

Find out how to fix gaps and gracks in a plastered facade.
How to prepare the substrate for installation of the insulation layer

Inspection and preparation of concrete and brick walls before installation of ETICS
Decorative plaster with visage stone effect

Application of Ceresit CT 710 plaster - Visage Stone Effect - Granite.
How to cope with bio contamination on facade

Bio contamination on facade: cleaning, anti-fungus concentrate, painting

CERESIT CR 50 RENOVATION SILICONE PAINT

Documents