Skip to Content

CERESIT CT 82

  • Adhesion after 24 hours
  • Durable and flexible thanks to 3D reinforcement
  • Good adhesion

Features and benefits

For polystyrene foam and making a reinforced layer; for fixing polystyrene boards and for making a thin layer reinforced with mesh on them when insulating buildings using the light-wet method.

Properties

Description

CERESIT® CT 82 mortar is used to insulate the external walls of buildings using polystyrene boards. It is a component of complex external wall insulation systems (ETICS) of CERESIT Ceretherm buildings. CT 82 mortar is used both for fixing EPS and XPS polystyrene boards, as well as for making a reinforced protective layer when insulating newly erected buildings and undergoing thermal renovation. Available pack size: 25 kg

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 82 SUBSTRATE PREPARATION

Fixing EPS-boards: CERESIT CT 82 shows good adhesion to carrying, compact and dry substrates. The adhesion to the existing plasters and paint coatings should be checked before starting the application. Reinforced layer application: when CT 82 is set (after approx. 24 hours), the boards should be ground with abrasive paper and additionally fixed with mechanical anchors.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 82

CERESIT CT 82 should be poured into cool clean water and stirred until the homogenous mass is obtained. Fixing EPS-boards: the mortar should be applied along the board edges and the board should be pressed to the wall. Reinforced layer application: the mortar should be spread along the surface of the EPS boards. The glass fibre mesh should be applied on the fresh mortar, and than smoothed the surface so that it is not be visible. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 82

When applying the reinforced layer, do not work walls in direct sunlight and protect the completed layer from rain. The works should be carried out in dry conditions, at the temperature air and substrate temperature from +5°C to +25°C. Skin and eyes should be protected. If the material comes into contact with your eyes, rinse them thoroughly with water and seek the advice of a doctor. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-zs/SAP_0201IBC016A0/searchResult.productFields.MainImageAltText}
    CERESIT ZS
    For fixing expanded polystyrene boards in the insulation of buildings in ETICS systems using the light-wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17-transparent/SAP_0201JAC016G7/searchResult.productFields.MainImageAltText}
    CERESIT CT 17 TRANSPARENT
    Deep penetrating, quick-drying primer for surface reinforcement of all absorbent substrates, suitable for indoor and outdoor areas. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-60/SAP_0201IDC014K0/searchResult.productFields.MainImageAltText}
    CERESIT CT 60
    Decoractive thin layer plaster with stone structure and grain size of 1.5 mm, 2.0 mm or 2.5 mm for indoor and outdoor applications. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-174/SAP_0201IDC014F2/searchResult.productFields.MainImageAltText}
    CERESIT CT 174
    Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-48/SAP_0201IFC014J6/searchResult.productFields.MainImageAltText}
    CERESIT CT 48
    Hydrophobic, vapour permeable paint for buildings’ facades and interiors. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
    CERESIT THERMO UNIVERSAL
    Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-35/SAP_0201IEC014H8/searchResult.productFields.MainImageAltText}
    CERESIT CT 35
    Decorative thin layer plaster for indoor and outdoor applications. Mineral plaster, woodworm lilke structure, grain 2.5 mm or 3.5 mm.
     
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-54/SAP_0201IFC014J9/searchResult.productFields.MainImageAltText}
    CERESIT CT 54
    Hydrophobic, vapour permeable paint for buildings’ façades and interiors. 

Frequently asked questions