-
Ready to use
-
Easy application and cleaning
-
Reusable
-
100% colour stability
-
Ultra-high stain resistance
-
Suitable for all indoor applications
CERESIT® CE 60 is a high quality ready-to-use grout for joints up to 6 mm in width. Due to its one-component-formula based on polymer, its application is exceedingly easy. It can be washed and formed immediately upon use. 100% stable colors and long-lasting perfect joints. CE 60 is suitable for all indoor applications and a great choice for almost any material. It works perfectly with a wide variety of tiles – from mosaics to large formats. Available pack size: 2 kg
Thoroughly clean the tile edges of any dirt. Remove any plastic spacers. The spaces must be empty through the entire depth of the tiles. Remove any residues of adhesive mortar from between the tiles. Grouting can begin after the tile adhesive has hardened and set. Check beforehand whether the tiles and natural stone are resistant to discolouration.
After opening the CERESIT CE 60 package, remove the protective foil. Keep the protective foil to secure the product after use. It is recommended that you briefly mix the grout, manually or mechanically, to obtain uniform texture. Once mixed, the grout is ready to use. Do not add water.
Apply the grout with a hard rubber float. Carefully work the mixed compound into the spaces between the tiles.
CERESIT CE 60 is suitable for grouting all types of ceramic cladding, such as glazed ceramic tiles, terracotta, gres, sintered quartz tiles, clinker tiles, porcelain stoneware, glass and ceramic mosaic, (colour-fast) natural stone cladding, for thin laminated stoneware slabs.
For the grouting of tiles of any size — from mosaic to extremely large formats, indoors, vertical and horizontal surfaces, for deformable and critical substrates, substrates exposed to vibration, underfloor and wall heating systems, surfaces where flexibility is required, e.g., chipboard, gypsum board, for wet areas such as bathrooms, kitchens etc.
Works should be carried out at ambient and substrate temperatures between +10°C and +30°C. Do not use if the room temperature is expected to drop below +10°C in the 24 hours following application.