Flex adhesives (powder)
CERESIT CM 17 WHITE
SUPER FLEXIBLE
White elastic adhesive with reinforcing microfibers Fibre Flex for natural stone, marble and mosaics
-
Elastic, resistant to deformation
-
High adhesion
-
Suitable for lining fireplaces and saunas
- Description
- How to Use
- FAQ
CERESIT® CM 17 WHITE is designed for fixing tiles made of all types of natural stone - marble, light limestone, travertine, granite, translucent stones, etc., tiles made of terracotta, clinker and porcelain stoneware, including large slabs, incl. over 1×1 m, as well as glass (except mirror) mosaics, on walls and floors inside and outside buildings, including complex and deformable bases and structural elements. Available pack size: 25 kg
-
Elastic, resistant to deformation
-
High adhesion
-
Suitable for lining fireplaces and saunas
-
Water and frost resistant
-
Resistant to tile slipping
-
Ideal for laying large tiles
CERESIT CM 17 WHITE mortar can be used on load-bearing and dry substrates, free from substances that reduce adhesion (such as: fats, bitumen, dusts).
Pour the contents of the package into a precisely measured amount of clean, cool water and mix with a drill with a mixer until a homogeneous mass is obtained. Wait 5 minutes and mix again. If necessary, add a small amount of water and mix again.
Spread the mortar over the substrate with a notched trowel. The size of the trowel teeth depends on the size of the tiles. Properly selected consistency and size of trowel teeth ensure that a pressed, typical ceramic tile does not flow from the vertical plane, and the mortar covers min. 65% of the PCB mounting surface.
Can be used on drywall and chipboard, durable non-peeling paint coatings, lightweight and cellular concrete, gypsum and anhydrite bases.
Suitable for lining fireplaces, stoves, saunas and hammams, the surfaces of which do not heat up above + 80 °C.
Work should be carried out in dry conditions at temperature air and ground from +5°C to +30°C.
CERESIT CM 17 WHITE IS PART OF OUR BIM MODELS
Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
