CERESIT CT 64

Features and Benefits

Acrylic plaster, woodworm like structure, grain 2.0 mm

Decorative thin-layer plaster for indoor and outdoor applications

Properties

  • resistant to weather conditions
  • low absorbability and high elasticity
  • resistant to damage
  • vapour permeable
  • BioProtect formula – resistant to the development of fungus, algae and mould
  • stability of colour
  • available in full palette of Ceresit
  • Colours of Nature®

Read More

Ceresit CT 64 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc.

We recommend the application of the plaster CT 64 as façade plaster within Ceresit Ceretherm ETICS (External Thermal Insulation Composite Systems) with the application of EPS-boards (Expanded Polystyrene boards).

In case of intensive dark colours, the material application should be limited to small areas, e.g. architectural details. Plaster CT 64 is protected form biological paralyses, e.g. fungus, mould and algae.

Step By Step

CT 64 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle.

Then, it should be given homogenous structure with a plastic long float flatly held. Depending on the type of the float movement:

circular, horizontal or vertical it is possible to obtain the structure features resulting from the grain.

Do not sprinkle plaster with water!

Work should be done on one surface without breaks, keeping the same product consistency. If there is a need to stop working,

the self-adhesive tape should be applied along the previously fixed line. Then plaster should be applied, structure formed, and tape torn off with the plaster remaining on it. After a break, the application should be continued from the fi xed place (the edge of the previously applied plaster can be protected with selfadhesive tape).