Skip to Content

CERESIT CT 60 ACRYLIC ELASTIC

  • Low-absorbability and high-elasticity
  • Resistant to various weather conditions
  • Vapour permeable and resistant to damage

Features and benefits

Decoractive thin layer plaster with stone structure and grain size of 1.5 mm, 2.0 mm or 2.5 mm for indoor and outdoor applications.

Properties

Description

CERESIT® CT 60 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards. CT 60 can be used within complex system of warming walls of outside buildings CERESIT Ceretherm ETICS with the application of EPS-boards. Plaster CT 60 is protected from biological paralyses, e.g. fungus, mould and algae. Available pack size: 25 kg.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 60 PLASTER MIXING AND SUBSTRATE PREPARATION

CERESIT CT 60 can be applied on smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low strength, as well as elastic, lime and adhesive paint coatings should be removed. CT 60 can be applied when the priming paint CT 16 is completely dry.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 60

CERESIT CT 60 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given a homogeneous structure with round movements by means of a plastic long float flatly held to achieve the appearance densely laid out aggregate grains structure. Work should be done on one surface without breaks, keeping the same product consistency. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 60

Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms where the material has been applied should be aired. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17-transparent/SAP_0201JAC016G7/searchResult.productFields.MainImageAltText}
    CERESIT CT 17 TRANSPARENT
    Deep penetrating, quick-drying primer for surface reinforcement of all absorbent substrates, suitable for indoor and outdoor areas. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-zu/SAP_0201IAC016A1/searchResult.productFields.MainImageAltText}
    CERESIT ZU
    For polystyrene foam and making a reinforced layer; for fixing polystyrene boards and for making a thin layer reinforced with mesh on them when insulating buildings using the light-wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/product#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}
    CERESIT CT 74
    Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-zs/SAP_0201IBC016A0/searchResult.productFields.MainImageAltText}
    CERESIT ZS
    For fixing expanded polystyrene boards in the insulation of buildings in ETICS systems using the light-wet method. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-174/SAP_0201IDC014F2/searchResult.productFields.MainImageAltText}
    CERESIT CT 174
    Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-thermo-universal/SAP_0201IAC015R0/searchResult.productFields.MainImageAltText}
    CERESIT THERMO UNIVERSAL
    Reinforcing Rendering Mortar - Basic coating XPS, EPS, MW. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/product#/ceresit-ct-80/SAP_0201IAC014M1/searchResult.productFields.MainImageAltText}
    CERESIT CT 80
    For fixing Expanded Polystyrene boards, XPS and mineral wool boards as well as for applying a thin-reinforced layer for thermal insulation of buildings by means of ETICS. 

Frequently asked questions