The whole content of the container should be carefully stirred. If the need appears, it is possible to adjust the product consistency to the application conditions by adding a small amount of clean water and mixing again. Neither rusty containers nor tools can be used. CT 73 should be evenly applied on the substrate at the thickness of the grain by means of a steel long fl oat held at the angle. Then, it should be given homogenous structure with a plastic long fl oat fl atly held. Depending on the type of the float movement: circular, horizontal or vertical it is possible to obtain the structure features resulting from the grain in plaster.
Do not sprinkle plaster with water!
Work should be done on one surface without breaks, keeping the same product consistency. If there is a need to stop working, the self-adhesive tape should be applied along the previously fixed line. Then plaster should be applied, structure formed, and tape torn off with the plaster remaining on it. After a break, the application should be continued from the fi xed place (the edge of the previously applied plaster can be protected with self-adhesive tape).
