Skip to Content

CERESIT CE 43 GRAND'ELIT

  • For indoor and outdoor use
  • For wide joints up to 20 mm
  • For walls and floors

Features and benefits

Mechanical and water-resistant grout mortar for joints of 1 to 20 mm width, suitable for heated floors and balconies. Perfect for high-traffic areas and wide joints.

Properties

Description

CERESIT® CE 43 mortar has increased chemical and mechanical resistance and is therefore ideal for grouting ceramics on balconies, terraces and heated floors. Thanks to CE 43's hydrophobic properties (aquastatic effect) water drops remain in the shape of pearls on the surface without penetrating into the structure. Perfect choice for wide joints.Available pack size: 25 kg.

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

SUBSTRATE PREPARATION FOR APPLICATION OF CERESIT CE 43

Tile edges shall be cleaned of any stains. Grouting can start after the tile adhesive has hardened and dried. Prior to application, make sure that CERESIT CE 43 does not leave permanent marks on the tile surface. Clean tile edges shall be rinsed with a wet sponge.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

MIXING OF CERESIT CE 43

CERESIT CE 43 should be poured into a precisely measured amount of clean, cool water and stirred until it forms a homogeneous mixture, free of lumps. Neither rusty containers nor tools can be used. Wait 3 minutes and stir the material again. Depending on the amount of added water, the consistency achieved is suitable for grouting either floor or wall tiles or masonry. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

APPLICATION OF CERESIT CE 43

Mortar with plastic consistency should be filled in the joints with a rubber trowel. After initial drying, tiles should be cleaned with a frequently rinsed and wrung out porous sponge. When joints dry too fast, they should be made slightly wet with a wet smooth sponge. Dry grout deposits can be removed using a dry cloth. 

Related how to guides

  • Premium Tiling System
    Providing Tiling Solutions
  • Laying Large Tiles
    Laying Large Tiles
  •  Preparation – testing the substrate
    Preparation – Testing The Substrate
  • Terraces, balconies and patios
    Terraces, Balconies And Patios
  • Bathrooms & Kitchens
    Bathrooms & Kitchens
  • Swimming & Wellness
    Swimming & Wellness
  • Tiling In Industrial Buildings
    Tiling In Industrial Buildings
  • Solutions For Special Formats & Substrates
    Solutions For Special Formats & Substrates
  • Heated floor systems
    Heated Floor Systems
  • Sound-reduction / Decoupling System
    Sound-reduction / Decoupling System

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cl-50/SAP_0201SLC013Q9/searchResult.productFields.MainImageAltText}
    CERESIT CL 50
    Two-component alternative sealing for waterproofing, suitable for wet areas such as bathrooms, balconies, swimming pools, etc. Certified for outdoor use. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cl-152/SAP_0201SMC013Q6/searchResult.productFields.MainImageAltText}
    CERESIT CL 152
    Sealing tape for the waterproof bridging of expansion and connection joints up to 120 mm width, suitable for indoor and outdoor application. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cm-16/SAP_0201SBC013T8/searchResult.productFields.MainImageAltText}
    CERESIT CM 16
    Tile adhesive mortar for ceramic tiles, suitable for wet areas, walls and floors, inside and outside. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cm-22/SAP_0201SBC013W5/searchResult.productFields.MainImageAltText}
    CERESIT CM 22
    Special tile adhesive for application of large format plates on difficult substrates, suitable for heated floors and balconies. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cm-77/SAP_0201SEC013X3/searchResult.productFields.MainImageAltText}
    CERESIT CM 77
    Ready-to-use tile adhesive with ultra high flexibility for critical substrates, to be used also on slightly vibrating surfaces, suitable for indoors and outdoors. For large tiles. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cm-17/SAP_0201SBC013W2/searchResult.productFields.MainImageAltText}
    CERESIT CM 17
    Premium, flexible tile adhesive with high adhesive strength for all kind of tiles on difficult substrates and for large tiles. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-ce-40/SAP_0201SGC013M9/searchResult.productFields.MainImageAltText}
    CERESIT CE 40
    Water-resistant, flexible, grout mortar for porcelain, ceramic, glass, natural stones and marble tiles from 1 up to 8 mm width. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/sealing/central-pdp#/ceresit-cs-25/SAP_0201POC014D6/searchResult.productFields.MainImageAltText}
    CERESIT CS 25
    High quality water resistant silicone for sealing connection & expansion joints in sanitary facilities. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-ce-42/SAP_0201SHC013N0/searchResult.productFields.MainImageAltText}
    CERESIT CE 42
    Rapid hardening grouting mortar for bright, translucent marble, natural stones & agglo of joint width 1 to 8 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cm-14/SAP_0201SBC013T4/searchResult.productFields.MainImageAltText}
    CERESIT CM 14
    Universal tile adhesive for wall & floor, indoor and outdoor for gres.
     
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-ce-60/SAP_0201SHC016K6/searchResult.productFields.MainImageAltText}
    CERESIT CE 60
    High quality and ready-to-use grout for joints up to 6 mm in width. 100% stable colors, very high dirt and stain resistance. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-cm-49-white/SAP_0201SCC013X1/searchResult.productFields.MainImageAltText}
    CERESIT CM 49 WHITE
    Special mega flexible (S2) white tile adhesive for demanding substrates, ideal for large-format tiles, young screeds and natural stone. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/tiling/central-pdp#/ceresit-ce-79/SAP_0201SQC013N9/searchResult.productFields.MainImageAltText}
    CERESIT CE 79
    Two-component chemical-resistant epoxy mortar for installation and grouting of tiles and mosaics with joint width 1 to 15 mm. Ideal for industry, public places and heavy traffic. 

Frequently asked questions