CERESIT® CT 75 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. We recommend the application of the plaster CT 75 as facade plaster within CERESIT ETICS with the application of EPS-boards and mineral wool. CT 75 plaster is recommended to be applied to the partitions where high-permeability is required. CT 75 is protected form biological paralyses, e.g. fungus, mould and algae. Available pack size: 25 kg.
CERESIT CT 75 can be applied to smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low strength, as well as elastic, lime and adhesive paint coatings should be removed. CT 75 can be applied when the priming paint CT 16 becomes completely dry.
CERESIT CT 75 should be evenly applied to the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogenous structure with a plastic long float flatly held. Depending on the type of the float movement, it is possible to obtain the structure features resulting from the grain in plaster. Work should be done on one surface without breaks.
Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms where the material has been applied should be aired. In case of contact with eyes, they should be rinsed with water and the general practitioner should be consulted.
CERESIT CT 75 is used for making thin-layer plasters. We recommend its application as facade plaster within CERESIT ETICS with the application of EPS-boards and mineral wool. CT 75 plaster is recommended to be applied to external walls where high permeability is required together with very low water absorption and high dirt resistance.
CERESIT CT 75 can be applied on insulation systems, concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc.
CERESIT CT 75 is present in CERESIT Ceretherm SELF CLEAN System