CERESIT THERMO UNIVERSAL 2-in-1

Fixing thermal insulation boards: THERMO UNIVERSAL mortar shows good adhesion to carrying, compact and dry substrates. Reinforced layer application. When THERMO UNIVERSAL is bounded (after approx. 3 days), any unevenness of the boards should be grounded with abrasive paper, any loose particles of insulation materials carefully brushed and the boards additionally reinforced.

CERESIT THERMO UNIVERSAL should be poured into water and stirred until the homogenous mass is obtained. Fixing thermal insulation boards: mortar should be applied and then the board should be pressed to the wall. Reinforced layer application: the glass fibre mesh should be applied on the fresh mortar and smoothed evenly. Fixing mineral wool boards: before application of the adhesive mortar CERESIT Thermo Universal it is necessary to apply thin coat of it as ‘priming’ of surface. 4. Reinforcing layer application: before proper base coat layer application, it is necessary to do the ‘priming’ layer on Mineral Wool surface. After drying time, the reinforced layer should be applied. 

The reinforced base layer must not be applied to surfaces exposed to very high levels of solar radiation and the applied layer must be protected from rain. The application must be carried out in dry conditions with the substrate and the ambient temperature between +5 °C and +25 °C. The skin and eyes should be protected.