Skip to Content

CERESIT CT 42 ACRYLIC ELASTIC

  • Low-water absorption
  • Damage resistant
  • Resistant to weather conditions

Features and benefits

Paint for buildings’ facades and interiors.

Properties

Description

CERESIT® CT 42 is used for protecting façades, concrete constructions, interiors. It can be applied on the mineral substrates (concrete, cement plasters, lime–cement plasters and lime plasters) and can be used for painting CERESIT. The facades covered with CT 42 can be washed with washing devices operating under low pressure. BioProtect formula is effective and durable protection of facade from biological paralyses. Available pack size: 15 l

Documents and downloads

How to use

CERESIT Tiling CE60 LP Instructions Illustration Step 1

CERESIT CT 42 SUBSTRATE PREPARATION

CERESIT CT 42 may be applied on carrying, smooth, dry and clean substrates. Firstly uneven and damaged substrates should be repaired. The existing dirt, layers of low strength, lime and adhesive paint coatings as well as the residuals of wall paper or glues should be completely removed. After being washed with water, the substrate should dry.

CERESIT Tiling CE60 LP Instructions Illustration Step 2

APPLICATION OF CERESIT CT 42

Before the paint application, the content of the container should be carefully stirred by means of a drill with a mixer for about 2 minutes. Between the application of the subsequent layers the 4- to 6-hour technological breaks should be maintained. CERESIT CT 42 should be applied evenly by means of a brush, roller or a sprinkling device. 

CERESIT Tiling CE60 LP Instructions Illustration Step 3

IMPORTANT TO NOTE WHEN USING CERESIT CT 42

Application should be performed in dry conditions with the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. The paint may cause decolouration impossible to be removed on glass, ceramic, wooden, metal and stone surfaces. Skin and eyes should be protected. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/interoir-finishing/central-pdp#/ceresit-ct-17/SAP_0201JAC014F1/searchResult.productFields.MainImageAltText}
    CERESIT CT 17
    Primer for surface strengthening of all absorbent substrates for indoor and outdoor application, prior to fixing ceramic tiles, pouring floors or fixing thermal insulation boards. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-48/SAP_0201IFC014J6/searchResult.productFields.MainImageAltText}
    CERESIT CT 48
    Hydrophobic, vapour permeable paint for buildings’ facades and interiors. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-16/SAP_0201IGC014E8/searchResult.productFields.MainImageAltText}
    CERESIT CT 16
    Dispersion of synthetic resins to prime the substrates for thin layer mineral, acrylic, silicate-silicone, silicone and elastomeric plasters. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-174/SAP_0201IDC014F2/searchResult.productFields.MainImageAltText}
    CERESIT CT 174
    Decorative thin layer plaster for indoor and outdoor applications, stone like structure, grain 1.5 mm or 2 mm. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-60/SAP_0201IDC014K0/searchResult.productFields.MainImageAltText}
    CERESIT CT 60
    Decoractive thin layer plaster with stone structure and grain size of 1.5 mm, 2.0 mm or 2.5 mm for indoor and outdoor applications. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-175/SAP_0201IDC014F4/searchResult.productFields.MainImageAltText}
    CERESIT CT 175
    Decorative thin-layer plaster for indoor and outdoor applications, woodworm like structure, grain 2 mm. 

Frequently asked questions