CERESIT CT 280 WINTER

  • Enables conducting works in low temperature and high air humidity
  • Easy to use
  • Neutral for other materials properties

Features and benefits

For binding and drying of adhesive mortars in the conditions of low temperatures.

Properties

Description

CERESIT® CT 280 is intended for use as an additive in the late autumn and early spring periods, when the temperature at night drops below zero. It is used as an additive for CERESIT cement-base mineral adhesive mortars and adhesive and reinforcing mortars, in order to accelerate binding and drying in low temperatures and high air humidity. Available pack size: plastic container 250 g

Documents and downloads

How to use

APPLICATION OF CERESIT CT 280

CERESIT CT 280 should be added directly to a product at the stage of mixing it with water in the amount of 250 g/25 kg (1 package). After a thorough mixing the material is ready for application. After mixing, the product should be used within 90 minutes. The applied material is tentatively resistant to temperatures below zero after 6–8 hours. CERESIT products, after CT 280, can be applied with the air and ground temperatures from 0 °C to +15 °C and air humidity up to 90%.

IMPORTANT TO NOTE WHEN USING CERESIT CT 280

Use of the additive does not cause decrease of the resistance parameters. Other materials mentioned in this data sheet have to be used in accordance with their instructions. In case of a contact of the material with eyes, they should be washed with water and a doctor should be consulted. 

Related how to guides

  • How to apply different types of plasters?
    How to apply different types of plasters?
  • How to apply architectural concrete plaster
    How to apply architectural concrete plaster?
  • Fix EPS insulation boards with adhesive mortar?
    How to fix EPS insulation boards with adhesive mortar?
  • Fix EPS insulation boards with PU adhesive?
    How to fix EPS insulation boards with PU adhesive?
  • How to repair mechanical damages in plastered insulation?
    How to repair mechanical damages in plastered insulation?
  • How to prepare the substrate for installation of the insulation layer
    How to prepare the substrate for installation of the insulation layer
  • Decorative plaster with visage stone effect
  • How to cope with bio contamination on facade

Related products

  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-240/SAP_0201IKC014G6/searchResult.productFields.MainImageAltText}
    CERESIT CT 240
    For binding and drying of plaster and paint coatings in the conditions of low temperatures. 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-74/SAP_0201IDC014L4/searchResult.productFields.MainImageAltText}
    CERESIT CT 74
    Decorative thin-layer plaster for indoor and outdoor applications, stone structure, grain 1.5, 2.0 or 2.5 mm 
  • ${/content/heliux/adhesive/ceresit/com/en/products/facade-solutions/central-pdp#/ceresit-ct-48/SAP_0201IFC014J6/searchResult.productFields.MainImageAltText}
    CERESIT CT 48
    Hydrophobic, vapour permeable paint for buildings’ facades and interiors. 

Frequently asked questions

CERESIT CT 280 is intended for use as an additive in the late autumn and early spring periods, when the temperature at night drops below zero. Application of CERESIT products should take place when the air and ground temperatures are above zero and the fall of the temperature below zero is permissible after 6–8 hours after finishing application.

CERESIT CT 280 can be applied as an additive for CERESIT cement-base mineral adhesive mortars, in order to accelerate binding and drying in low temperatures and high air humidity.

CERESIT CT 280 is compatible with CERESIT adhesive mortars and adhesive and rendering mortars (ZS/CT 81, ZU/CT 82, CT 83, CT 180, CT 80, CT 85, CT 190, CT 87).