Wet plasters (finishes)
CERESIT CT 63
ACRYLIC ELASTIC
Decorative thin-layer plaster for indoor and outdoor applications CT. Woodworn like structure, grain 3 mm.
-
Elastic
-
Low-water absorption
-
Resistant to weather conditions and damages
- Description
- How to Use
- FAQ
CERESIT® CT 63 is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards. We recommend the application of the plaster CT 63 as façade plaster within CERESIT Ceretherm ETICS with the application of EPS-boards. In case of intensive dark colours, the material application should be limited to small areas. CT 63 is protected form biological paralyses. Available pack size: 25 kg
-
Elastic
-
Low-water absorption
-
Resistant to weather conditions and damages
-
Vapour permeable
-
BioProtect formula – resistant to fungi, algae and mould
-
Colour stability
CERESIT CT 63 can be applied on smooth, carrying, dry and clean substrates free from grease, bitumen, dust and other substances decreasing adhesion. Uneven and damaged substrates should be first smoothed and repaired. The existing dirt, layers of low strength, as well as elastic, lime and adhesive paint coatings should be removed. CT 63 can be applied when the priming paint CT 16 becomes completely dry.
The whole content of the container should be carefully stirred. CERESIT CT 63 should be evenly applied on the substrate at the thickness of the grain by means of a steel long float held at the angle. Then, it should be given homogeneous structure with a plastic long float flatly held. Depending on the type of the float movement it is possible to obtain the structure features resulting from the grain.
Application should be performed in the ambient and substrate temperature ranging from +5 °C to +25 °C and the humidity below 80 %. This product should not be mixed with other plasters, pigments, resins and binders. The rooms where the material has been applied should be aired. In case of contact with eyes, they should be rinsed with water and a general practitioner should be consulted.
CERESIT CT 63 is used for making thin-layer plasters. We recommend the application of the plaster CT 63 as facade plaster within CERESIT Ceretherm ETICS (External Thermal Insulation Composite Systems). In case of intensive dark colours, the material application should be limited to small areas, e.g. architectural details.
CERESIT CT 63 is used on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc.
CERESIT CT 63 is present in CERESIT Ceretherm POPULAR System
CERESIT CT 63 IS PART OF OUR BIM MODELS
Building Information Modeling (BIM) is an innovative approach to the planning, design, construction, and management of buildings and infrastructure. This smart model is a common source of knowledge for obtaining information about a building and provides a reliable basis for decision-making throughout the entire life cycle of a building, from conception to demolition.
